Loading ...
Loading ...
Loading ...
Changing the Custom Pane
6. Reinstall the toe guard using the existing screws and 1/2"
Custom Panel with Handle (Model KUCP021R) washer. Then, reinstall the foot pedal.
Dimensions
Use these dimensions drawings to create acustom panel for use
without a trim kit. The panel should be 1/2"to 5/8"(13 mm to
16 mm) thick.
NOTE: A thicker panel may need rounded front corners and a
cutout for access to the handle.
C
2313/le''
(60.5 cm)
Installation
1. Remove the mounting screws attaching the foot pedal to the
compactor. Remove the foot pedal.
A. Mounting screws
B. Foot pedal
2. Remove the mounting screws attaching the toe guard to the
compactor. Remove the toe guard.
3. Remove the mounting screws attaching the decorative panel
to the compactor. Remove the decorative panel and discard
the mounting screws.
4. Align the bottom of the custom panel with the bottom of the
drawer front.
5. Secure the panel from the back using four #8 x 1" wood
screws as shown.
E
F
A. Handle C. Panel screw locations E. Washer
B. Custom panel D. Toe guard F. Toe guard screw
Custom Panel without Handle (for all C and S models)
Dimensions
Use these dimension drawings to create a custom panel for use
without a trim kit. The panel should be 1/2"(13 mm) minimum
thickness.
25"
(63.5 crn)
15"
(38.1 cm)
Loading ...
Loading ...
Loading ...