Loading ...
Loading ...
Loading ...
13. Remove the shipping base from the bottom of the compactor.
A_ B
A. Leveling legs
B. Shipping base
Locat on Requ rements
Product Dimensions
-C--
341/8"
(86.7 cm)
Cutout Dimensions
A
\
3" min.
(7.6 cm)--_
, s
24" min.
(61 cm)
18,,iin.
(45.7 cm)
151/4" rnin.
(38.7 crn)
A. Grounded electrical outlet must be a minimum of 3" (7.6 cm) away
from surrounding cabinets or nearby walls as shown. It can be
placed either to the left or the right side of the product.
Clearance Dimensions
I1 =ol
B_ __1 A i_-_
A. Leave6" (15.2 cm)of clearancespace to the right side of the
compactor in order to remove the compactor bags.
B.Leave23" (58.4cm) of clearancein front of the compactor in
order to fully open or remove the compactor drawer.
Electr cal Requ rements
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Recommended Grounding Method
This compactor is for use on a single phase, 115-volt, 60 Hz, AC
only, 15- or 20-amp fused and properly grounded circuit and is
equipped with a grounding plug as shown below. It is recommended
that a separate circuit serving only this appliance be provided.
This compactor must be grounded while in use to reduce the risk
of electric shock. The compactor is equipped with a three-
conductor cord and 3 prong grounding-type plug to fit the proper
grounding-type receptacle. The green (or green and yellow)
conductor in the cord is the grounding wire.
NOTE: Do not connect the green (or green and yellow) wire to a
live terminal.
Loading ...
Loading ...
Loading ...