Loading ...
Loading ...
Loading ...
iNSTALL IVIULCHER PLATE
(See Figs. 5 and 6)
• Install two latch hooks to mulcher plate using screw,
washer, lockwasher, and weld nutas shown°
NOTE: Preoassembfe weld nut to latch hook by inserting
weld nut from the top with hook pointing down°
o Tighten hardware securely.
° Raise and hold deflector shield in upright position.
• Place front of mulcher plate over front of mower deck
opening and slide into place, as shown,
Hook front latch into hole on front of mower deck.
Hook rear latch into hole on back of mower deck.
CAUTION: Do not remove discharge
guard from mower. Raise and hold
guard when attaching mulcher plate
and allow it to rest on plate while in
operation.
....... III1' III
o
o
TO CONVERT TO BAGGING OR
DISCHARGING
Simply remove mulcher plate and store in a safe place.
Your mower is now ready for dischargingor installationof
optional grass catcher accessory.
NOTE: it is not necessary to change blades. The mulcher
blades are designed for discharging and baggingalso.
LATCH
HOOK
w,s.
MULCHER
PLATE
WELD NUT
HOOK POINTS
LOCK
WASHER
HOOK
LOOK
WASHER
WASHER
\_'_SCREW
WELD
NUT
DEFLECTOR
SHIELD
FIG. 5
HOOKS
FIG. 6
9
Loading ...
Loading ...
Loading ...