Loading ...
Loading ...
Loading ...
BLY
CONNECT BATTERY (See Figs. 2 and 3)
CAUTION: Do not short battery termi-
nals. Before connecting battery, re-
move metal bracelets, wristwatch
bands, rings, etc.
Positive terminal must be connected
first to prevent sparking from acciden-
tal grounding ....
° Remove cardboard pecking from seat pan and lift seat
pan to raised position.
,, Open battery box door.
= Remove terminal protective caps and discard.
,, tf this battery is put into service after month and year
indicate_lon label (label located between terminals)
charge battery for minimumof one hour at 6-10 ampso
° Firstconnect RED battery cableto positive(+) terminal
with hex bolt, flat washer, lockwasher and hex nut as
shown. Tightensecurelyo
o Connect BLACK groundingcable to negative (-) termi-
nal with remaining hex bolt, flat washer, lock washer
and hex nut. Tighten securely.
SEAT
PAN
BATTERY
BOX DOOR
RG. 3
INSTALL SEAT (See Fig. 4)
Adjust seat before tighteningadjustment bolt.
° Close battery box door.
Open battery box doorfor:.
o Inspection for secure connections (to tighten hard-
ware).
o Inspectionfor corrosion.
° Testing battery.
• Jumping (if required).
° Pedodic charging.
DISCARD TERMINAL PROTECTIVE
CAPS
PosmvE /
IRED) CABIE_ _ HEX LOCK
NUT WASHER
FLAT
vt WASHER
FIG. 2
BOLT
NEGATIVE
(BLACK)CABLE
o Remove cardboard packing on seat pan.
° Place seat on seat pan and assemble shoulder bolt.
o Assemble adjustment bolt, lock washer and flat washer
loosety_ Do not tighten. ' '
, Tighten shoulder bolt securely.
° Lower seat into'operatingposition and sit on seat.
• Slideseat until a comfortableposition is reached which
allows you to press clutch/Drake pedal all the way
down.
• Get off seat without moving its adjusted position.
° Raise seat and tighten adjustment bolt securely.
SEAT
SEAT PAN
SHOULDER
BOLT
FLAT WASHER
ADJUSTMENT
BOLT LOCK WASHER
FIG. 4
8
Loading ...
Loading ...
Loading ...