Dewalt DWE46170 INSTRUCTION MANUAL

Loading ...

English

OPERATION

WARNING: To reduce the risk of injury, ALWAYS turn off

tool and disconnect the tool from the power source before

making any adjustments or removing or installing attachments

or accessories. This applies to both the grinder and the dust

extractor vacuum. Such preventative safety measures reduce the

risk of starting the tool accidentally.

WARNING: For your own safety, read the instruction manual for

both the grinding tool and the dust extractor vacuum before using any

accessory. Failure to heed these warnings may result in personal injury

and serious damage to the tool and the accessory. When servicing this

tool, use only identical replacement parts.

NOTE: The amount of dust retained by the dust extractor vacuum

is dependent on its filter system. Refer to the dust extractor vacuum

instruction manual for more information.

1. Ensure all assembly instructions have been completed.

2. Turn the dust extractor vacuum on as instructed in the dust

extractor vacuum instruction manual.

3. Turn the tool on as instructed in the tool instruction manual and

allow it to reach full speed before making contact with work

surface.

4. Place the surface grinding shroud to flat work surface, such as a

floor or wall, and begin grinding.

5. When surface grinding is complete, turn the tool off and disconnect

from the power source. Allow the tool to stop rotating before laying

it down.

NOTE: The surface grinding shroud and dust extractor vacuum will

only be effective when used with a diamond surface cup wheel on a

flat surface.

Edging Use Application (Fig. 7)

This concrete grinding shroud features a hinged, edge-grinding door

to allow flush grinding against the wall.

1. Turn off the tool and disconnect from power source.

2. Open the edge grinding door (D). The door should remain open

and rest in a parked position.

3. Connect the tool to the power source.

4. Position hands and body away from

FIG. 7

wheel and door opening.

5. Place the door edge flush to the

work surface before turning the tool

on and begin grinding. Remove the

tool from the work surface before

turning the tool off.

6. When flush grinding is complete,

turn off the tool and disconnect

from power source.

7. Allow the tool to stop rotating

before pushing edge grinding door

(D) closed.

MAINTENANCE