Dewalt DWE46170 INSTRUCTION MANUAL

Loading ...

English

WARNING: This attachment MUST BE used with a dust extractor

system. ALWAYS wear certified safety face or dust mask.

NOTE: Ensure hose connection is secure.

NOTE: The amount of dust retained by the dust extractor vacuum

is dependent on its filter system. Refer to the dust extractor vacuum

instruction manual for more information.

All D

EWALT dust collection shrouds are designed to connect and

secure easily with the DEWALT universal DWV9000 connector. The

DWV9000 connector comes pre-installed on some DEWALT dust

extractors. Consult your local dealer for compatible extractors.

CONNECTING THE DWV9000 ONTO THE SHROUD (FIG. 4)

NOTE: If the DWV9000 is not installed on your dust extractor hose

refer to Installing the DWV9000 on a Dust Extraction Hose.

1. With the DWV9000 connector (M) unlocked, slide it onto the

shroud's dust port (F).

2. Lock the DWV9000 connector (M) to secure.

FIG. 4

INSTALLING THE DWV9000 ON A DUST EXTRACTION HOSE

(FIG. 5, 6)

The DWV9000 is can be attached to a 1–1/4" or 2–1/2" (31.8mm or

63.5mm) dust extraction hose. The DWV9000 can be used with a

2–1/2" (31.8mm) hose with the use of the DWV9190 adaptor.

For 1–1/4" (31.8mm) hoses:

1. Remove the existing hose connector (L) by twisting clockwise, or

if connector is permanently attached, remove by cutting.

2. Install the universal DWV9000 connector (M) onto the hose by

turning counterclockwise.

FIG. 5

For 2–1/2" (63.5mm) hoses:

1. Use a DWV9190 adaptor (N), and slide it onto the existing hose

connector (L).

2. Install the universal DWV9000 connector (M) onto the adaptor by

turning counterclockwise.

FIG. 6

DWV9190

Loading ...

Dewalt DWE46170 7" Surface Grinding Dust Shroud