Loading ...
Loading ...
Loading ...
4. Maintenance chart (Page 18)
5. Operator troubleshooting (Page 19)
6. Service parts list
A: Item No.
B: Code No.
C: No. Used
D: Remarks
CAUTION
●
Repair, modification and inspection of
metabo HPT Power Tools must be carried out
by a metabo HPT Authorized Service Center.
This Parts List will be helpful if presented
with the tool to the metabo HPT Authorized
Service Center when requesting repair or other
maintenance. In the operation and maintenance
of power tools, the safety regulations and
standards prescribed in each country must be
observed.
MODIFICATIONS:
metabo HPT Power Tools are constantly being improved
and modifi ed to incorporate the latest technological
advancements.
Accordingly, some parts (i.e. code numbers and/or
design) may be changed without prior notice.
SERVICE AND REPAIRS
WARNING
●
Only service personnel trained by
metabo HPT, distributor or employer
shall repair the Stapler.
●
Use only parts supplied or recommended by
metabo HPT for repair.
All quality Staplers will eventually require servicing or
replacement of parts because of wear from normal use.
NOTE:
Specifi cations are subject to change without any
obligation on the part of metabo HPT.
Maintenance chart
ACTION WHY HOW
Drain air line fi lter daily. Prevent accumulation of moisture and
dirt.
Open manual petcock.
Keep lubricator fi lled. Keep the Stapler lubricated. Fill with metabo HPT pneumatic tool
lubricant.
Clean fi lter element and blow air
through fi lter in direction opposite
to normal fl ow daily.
Prevent clogging of fi lter with dirt. Follow manufacturer’s instructions.
Clean magazine and feeder
mechanism.
Prevent a jam. Blow clean daily.
Keep push lever working
properly.
Promote operator safety and effi cient
Stapler operation.
Blow clean daily.
Lubricate the Stapler after
stapling.
Extend the Stapler life. Supply 5 – 10 drops of lubricant into
the Stapler.
Drain air compressor daily. Keep the Stapler operated properly. Open petcock on air compressor tank.
18
English
000BookN5008AC2USmetabo.indb18000BookN5008AC2USmetabo.indb18 2018/03/1916:30:292018/03/1916:30:29
Loading ...
Loading ...
Loading ...