Loading ...
Loading ...
Loading ...
Target
Validity
If y
ou set a higher validity, the required target features should be more
obvious, and the alarm accuracy would be higher. The target with less obvious
features would be missing.
Figure 6-3 Set Rule
5.
Oponal: You can set the parameters of
mulple areas by repeang the above steps.
6.
For the arming schedule seîž«ngs, refer to
Set Arming Schedule . F
or the link
age method seîž«ngs,
refer to
Linkage Method Seîž«ngs .
7.
Click Sa
v
e.
6.2.7 Set Line Crossing Detecon
It is used to detect objects crossing a pre-dened virtual line. If it occurs, the device can take
linkag
e acons.
Steps
1.
Go to Conguraon → Event → Smart Event → Line Crossing Detecon .
2.
Check Enable.
3.
Select one Line and set the size lter. For the size lter sengs, r
efer to
Set Size Filter .
4.
Click Dr
aw Area and a line with an arrow appears in the live video. Drag the line to the locaon
on the live video as desired.
5.
Set rules.
Direcon It stands for the direcon from which the object goes across the line.
A<->B: The object going acr
oss the line from both direcons can be detected
and alarms are triggered.
Network Camera User Manual
46
Loading ...
Loading ...
Loading ...