Loading ...
Loading ...
Loading ...
6.2.2 Set Defocus Detecon
The blurred image caused by lens defocus can be detected. If it occurs, the device can take linkage
acons.
Steps
1.
Go to Conguraon → Event → Smart Event → Defocus Detecon .
2.
Check Enable.
3.
Set Sensivity. The higher the value is, the more easily the defocus image can trigger the alarm.
You can adjust the value according to the actual environment.
4.
For the linkage method sengs, refer to Linkage Method Sengs .
5.
Click Save.
Note
The funcon is only support
ed by certain models. The actual display varies with models.
6.2.3 Detect Scene Change
Scene change detecon funcon de
tects the change of surveillance scene. Some certain acons
can be taken when the alarm is triggered.
Steps
1.
Go to Conguraon → Event → Smart Event → Scene Change De
tecon .
2.
Click Enable.
3.
Set the Sensivity. The higher the value is, the more easily the change of scene can be detected.
But the detecon accuracy is reduced.
4.
Re
fer to Set Arming Schedule for seng scheduled me. Refer to Linkage Method Sengs for
seng linkage method.
5.
Click Save.
Note
The funcon v
aries according to dierent models.
6.2.4 Set Face Detecon
It helps to detect the face in the detecon region. If a face is detected, the device triggers the
linkag
e acons.
Steps
1.
Go to Con
guraon → Event → Smart Event → Face Detecon .
2.
Check Enable Face Detecon.
3.
Oponal: Highlight to display the face in the image.
1)
Check Enable Dynamic Analysis For Face Detecon.
Network Camera User Manual
44
Loading ...
Loading ...
Loading ...