Loading ...
Loading ...
Loading ...
9
● LNR →Last Number Redial：
MT-8006B is on the Talk position,
If a call is not successful and you wish to redial the same
number, just press the LNR button.
The last number redial function is available in either the Pulse
or Tone Mode. The redial memory has a 32-digit capacity.
When checking the incoming or dialing record, press the LNR
button, the number you are dialing will show on the LCD
● PSE →Pause：
There are some cases where it may be necessary to insert a
pause between digits of a stored number, such as when
accessing a trunk through a PBX that requires a 9 to get out.
To store a number with a pause, simply press the PSE button
at the point where the pause is required. For example to store
9-555-1212. The PSE button inserts a 4 second pause.
● DEL →Delete：
In setting mode DEL key is used to quit setting mode. In
pre-dial mode DEL key is used to delete the last digit. In call
in/dialing out list, press DEL will delete a phone number and
press DEL key for 4 seconds all the number in list will be
erased.
● MUTE：
The mute switch turns the handset microphone and
speakerphone microphone off for privacy in Talk mode. When
turn the mute switch to left side, the “MUTE” LED lights up
then the mute function is on, then turn to right side the
“MUTE” LED will turns off and the mute function will also stop,
and back to normal talk mode.
● POL-/G；POL+/R →Telephone line polarity test：
Connect the telephone line to the Angled bed of nails.
MT-8006B is on the Talk position
If the LED is red light, the red Angled bed of nail is
connected to the + line.
If the LED is green light, the red Angled bed of nail is
connected to the - line.
Loading ...
Loading ...
Loading ...