Loading ...
Loading ...
Loading ...
9
11. INSTALL THE DECORATIVE FLUE (CONTINUED)
NON-DUCTED INSTALLATION:
Pull the upper flue up and attach the non-duct plenum with collar to the upper flue using 4 ST4 x 8
provided screws.
HJ0161
ALL INSTALLATIONS:
Slide up the upper flue until it is aligned with its mounting bracket. The bracket must be
inside the flue. Secure the upper flue to its bracket using 2 no. 8 x 5/16” mounting screws.
NOTE: Duct (or non-duct plenum) not shown in illustration to ease understanding.
Remove protective plastic film covering the upper flue and the hood.
HO0287
UPPER FLUE MOUNTING BRACKET
FRONT VIEW
UPPER
FLUE
DUCTED INSTALLATION:
Attach the 6” round duct section to the rest of the ducting. Use metal foil duct tape to seal the joint.
12. REINSTALL GREASE FILTERS
ALL INSTALLATIONS:
To reinstall the grease filters, align rear filter tabs with slots in the hood.
Pull down the metal latch tab, push each filter into position and release.
Make sure filters are securely engaged after installation.
HD1030
NON-DUCTED INSTALLATION:
Attach two non-duct recirculation filters to sides of blower by aligning key lock slot and rotating
until filters lock into place.
HA0137
Loading ...
Loading ...
Loading ...