Loading ...
Loading ...
Loading ...
www.SereneLifeHome.com
18
Then you stand on the running belt and hold the armrests with both hands. Use
one force to crush the running belt. (We recommend using the amount of
pedaling pressure generated by the user's own weight to step on the running
belt.)
A. If the momentary step on the pressure can not stop the running belt, it shows
that the tightness of the V-ribbed belt and running belt is appropriate.
B. If you observe that the momentary step on the pressure makes the running
belt stop rotating, and the V-ribbed belt and the front roller are still rotating, it
means that the running belt is a little slack and you must make appropriate
adjustments to facilitate safe use. (Adjust the tightness of the running belt. See
the maintenance guide on the previous page.)
C. If you observe that the momentary step on the pressure makes the running
belt and V-ribbed belt stop rotating, and the motor is still rotating, it means that
the V-ribbed belt is somewhat loose and must be adjusted properly to facilitate
safe use.
Step 2:Use a wrench to adjust the adjustment screw on the motor base as
appropriate. At the same time, gently turn the V-ribbed belt between the motor
shaft and the front roller by hand. If it is too loose, you can turn the multi-wedge
belt upside down by 100%; if it is too tight, you can turn the V-ribbed belt at an
angle. Very limited; it is appropriate to turn 80% of the V-ribbed belt after
adjustment. Please adjust the tension of the V-ribbed belt to 80%.
Step 3: Finally, lock the motor base and install the front guard.
Method of adding silicone oil:
Step 1:The treadmill will be lifted upwards.
Step 2: Open the silicone bottle and squeeze it over the running plate as shown
on the picture.
Loading ...
Loading ...
Loading ...