Loading ...
Loading ...
Loading ...
ENGLISH
8
• Make sure the dust extractor is completely dry before
switching back to dry pick up applications.
To Empty Tank (Fig.A,F, G)
WARNING: Before emptying the dust extractor,
ALWAYS make sure the three position switch is in the
off position amd remove the battery pack.
CAUTION: Remove the dust extractor hose from any
liquid before emptying the dust extractor.
1. Press the three position switch
3
to the Off (O) position
and remove thebattery.
NOTE: During wet pick up applications it is normal for
a small amount of liquid to flow from the dust extractor
hose when the dust extractor is shutoff.
2. Unlatch tank latches
4
and remove dust extractor
head
6
.
3. Empty contents of tank
16
into a suitable container
ordrain.
Connecting to Power Tools (Fig.A,E)
1. Choose the correct power tool adapter
26
to fit the
power tool connection on the tool to be used, refer to
Optional Accessories under Maintenance. Attach
power tool adapter
26
to powertool.
2. Your DEWALT construction dust extractor is fitted
with the DEWALT AirLock® connection system. The
AirLock® allows for a fast, secure connection between
the dust extractor hose
2
and power tool. The
AirLock® connector
25
connects directly to DEWALT
compatible tools or through the use of an AirLock®
adapter(available from your local DEWALT supplier).
Refer to the Optional Accessories section for detail on
availableadapters.
NOTE: If using an adapter, ensure it is firmly attached to
the tool outlet before following the stepsbelow.
a. Ensure the collar on the AirLock® connector is in the
unlock position. (Refer to FigureE.) Align notches
17
on collar and AirLock® connector as shown for unlock
and lockpositions.
b. Push the AirLock® connector onto the adapter
connectorpoint.
c. Rotate the collar to the lockedposition.
NOTE: The ball bearings inside collar lock into slot
and secure the connection.The power tool is now
securely connected to the dustextractor.
Fig. E
25 26
1717
Fig. C
1
7
8
2. To remove the battery pack from the dust extractor,
press and hold the battery release
8
on the battery
pack and remove. To charge the pack, insert it into your
DEWALTcharger.
Using the Dust Extractor (Fig.A,D)
1. Attach the appropriate accessory to the hose
2
.
2. Insert the battery pack
7
.
3. To turn dust extractor on, press the three position
switch
3
to the On(I) position.
4. To use in Wireless Tool Control™ mode press the three
position swtich to the Wireless Tool Control™ (
) position.
The trigger of the connected tool, or the button on the
remote will control the dust extractor.
NOTE: Refer to Pairing the Dust Extractor with a Tool
using Wireless Tool Control™ Mode to use the dust
extractor with a Wireless Tool Control™ equipped tool
or remote.
5. When finished, turn the dust extractor off by pressing
the three position switch to the Off(O) position.
3
Fig. D
19
11
Wet Pick Up Applications (Fig. H)
The dust extractor is designed to perform as a wet/dry unit.
• Use seperate filters for wet and dry pick up applications
to avoid filter clogging.
• Water sense probes
27
will automatically shut off the
dust extractor when the maximum fill level has been
reached. Move the three position switch to the Off (O)
position, remove the battery pack, and empty the tank
before turning the dust extractor back on.
• It is recommended that the tank be emptied of any dry
contents prior to being used for wet pick up to facilitate
tankcleaning.
• When finished with a wet pick application, remove the
filters and allow them to dry completely. This will avoid
mildew gathering on the filters.
Loading ...
Loading ...
Loading ...