Loading ...
Loading ...
Loading ...
30 31
Forward-facing Installation with
Lower Anchor Connectors
• To avoid a strangulation hazard, you MUST store the
unused lower anchor connector assembly, with all slack
removed, in storage area on the back of the seat
(page 45). Roll or fold excess lower anchor connector
strap and secure with a rubber band to prevent serious
injury to vehicle occupants.
Forward-facing
LATCH is a system for attaching the child restraint to your
vehicle seat. It is to be used in place of your vehicle’s seat
belts and can be used in vehicles with LATCH anchors. DO
NOT install this child restraint with LATCH and the
vehicle’s seat belts. Your vehicle owner’s manual may
refer to this system as ISOFIX, Universal Anchorage
System (UAS), or Lower Universal Anchorage System.
DO NOT use the lowest set of harness slots
forward-facing. The harness may not properly
restrain the child in the event of a crash.
A
B
C
1
Make sure that
the harness straps
are in one of the
three upper strap slots
A
. The
harness straps MUST start at
shoulder height or above, using
the strap slots closest to your
child’s shoulders
C
. The splitter
plate is attached to the bottom
of the harness strap in the child
position
B
(page 40). This will
provide more room for your child
to fit comfortably.
WARNING
WARNING
Loading ...
Loading ...
Loading ...