Loading ...
Loading ...
Loading ...
26 27
TOC
F
E
6
The seat belt must be as tight as possible.
Put your full weight into the child restraint as you
tighten the seat belt
E
.
Check your work.
Make certain the belts are tight. If you can move the
child restraint more than 25 mm (1 in.) side to side or
front to back at the rear-facing belt path
F
, the vehicle
belt is not tight enough. If you have not tightly secured
the child restraint, try again, move it to another location,
or install with the lower anchor connector assembly
(page 19).
• If vehicle seat belts are not routed and fastened correctly,
the child restraint may not protect your child in a crash.
• Check your vehicle owner’s manual to determine how to
lock your seat belt for child restraint installation. The seat
belt must be locked to properly secure the child restraint.
• DO NOT use this child restraint if it moves more than
25 mm (1 in.) side to side or front to back at the
rear-facing belt path
F
. Serious injury or death may
result from poor installation. If you can not tightly
secure the child restraint, try again or move it to another
location, or install with the lower anchor connector
assembly (page 19).
WARNING
Loading ...
Loading ...
Loading ...