Loading ...
Loading ...
Loading ...
Garden hose
During the Dry mode, you will need a garden hose (sold separately) to drain the condensate from the unit.
During the Heat mode, you will need a 1/4" drainage hose (packed with the unit) to drain the condensate
from the unit.
Follow the steps below:
Unscrew the drain cap of continuous drain outlet(Fig.20).
Connect one end of the garden hose (sold separately) to the drain outlet then lead the other end into
a drain that is lower than the unit(Fig.21).
Condensate may flow out after removing the drain cap, if the unit is running in Cool or Auto mode.
When you want to remove the garden hose, prepare a drip tray (not supplied) to collect the
condensate from the drain outlet.
Please be sure that the height of the drain and section of the drain hose should not be higher than
that of the drain outlet, or the continous drainage may not work properly.
During Cool or Auto mode, it is recommended to disable continuous drainage by replacing the
drain cap to the drain outlet, to reach the maximum performance.
Follow the steps below:
Unscrew the heat pump drain cap and rubber of heat pump drain outlet(Fig.22).
Insert the rubber head into the outlet. Then screw the sealing cap into the heat pump drain outlet(Fig.23).
Lead the other end of the 1/4" drainage hose to a drain that is not 16ft(5m) higher than the heat pump
drain outlet.
Drainage Instructions
Continuous Drainage
Heat pump Drainage(For heating & cooling model only)
NOTE
Figure 20 Figure 21
Operating Instructions
Drain cap for DRY
mode
Heat pump
drain cap
heat pump
drain outlet
rubber head
sealing cap
1
2
Figure 22 Figure 23
Loading ...
Loading ...
Loading ...