Loading ...
Loading ...
Loading ...
Plug in the unit, then press the “on·off” button (when turned on, the unit will operate as the last setting
before shutdown.
To switch the unit off, press “on·off” button again, then remove the plug.
Do NOT switch the unit off by removing the plug.
Always switch the unit off by pressing the “on·off” button and wait for few minutes before removing the plug.
Press the “mode” button until the left side of LCD
screen displays “cool”.
Press the “ fan speed” button to choose the fan speed
“auto”, “high”, “mid”, and “low”.
Press the “ ” and “ ”button to choose the temperature you want.
Press the “mode” button until the left side of LCD
screen displays “fan”.
In this mode, you can select fan speed “high”, “mid”, “low” by pressing
the Fan speed button and referring to the diagram.
Note: In this mode, the air exhaust hose does not need to be connected.
How to Use the Remote Control
TURNING THE UNIT ON
Cool mode
Dry mode
Fan mode
Operating Instructions
Press the “mode” button until the left side of LCD screen displays “dry”.
In this mode, the “ ” or “ ” button is disabled and the screen will remain
blank. The unit will continuously drain moisture from the room.
Note:
In this mode, the fan speed will be set as “low” automatically, which
cannot be changed.
In this mode, condensate drainage are required, refer to the
"Drainage Instructions" on Page 16-17 for more instructions to drain
the excess condensate.
Loading ...
Loading ...
Loading ...