Loading ...
Loading ...
Loading ...
Timer mode
How to delay startup
Plug in the unit, so the unit turns to standby.
Press the “timer” button, then the Timer indicator and number of hours on the screen will light.
Tap or hold the UP arrow ( ) or the DOWN arrow ( ) to change delay start timer at 0.5 hour increments up
to 10 hours, then at 1 hour increments up to 24 hours.
After 5 seconds, the setting will be confirmed automatically and the control will count down the time remaining until startup.
The unit will start up in the mode as previously set. Press the “timer” button again within 5 seconds, you will quit the timer
setting directly.
To cancel the setting, press the “timer” button again will show the remain time and press the button again to quit the function.
The timer facilitates the user to delay the unit startup or shutdown.
AUTO mode
Press the “mode” button until the AUTO mode indicator lights.
Press the “ ” or “ ” button to choose the temperature you want. The screen will display the setting temperature.
In this mode, the unit will automatically select cooling, heating(not applicable for cooling only models), or fan only
operation depending on what temperature you have selected and the room temperature. The air conditioner will
control room temperature automatically round the temperature point set by you.
Note:
In this mode, fan speed cannot be selected.
Operating Instructions
°C
°F
°C
°F
You can delay shutdown when the unit is on.
Press the “timer” button, then the Timer indicator and number of hours on the screen will light.
Tap or hold the UP arrow ( ) or the DOWN arrow ( ) to change delay shutdown timer at 0.5 hour increments up
to 10 hours, then at 1 hour increments up to 24 hours.
After 5 seconds, the setting will be confirmed automatically and the control will count down the time remaining until
shutdown. Press the “timer” button again within 5 seconds, you will quit the timer setting directly.
To cancel the setting, press the “timer” button again will show the remain time and press the button again to quit the function.
How to delay shutdown
°C
°F
Loading ...
Loading ...
Loading ...