Loading ...
Loading ...
Loading ...
5
• Place the Filter Disc on to the dry Funnel Filter. Do not overfill. Filter should sit on the
inside groove of the Funnel. If it does not, it has too much coffee grounds in it.
• Place Pitcher onto Boiler (gasket area) and twist to tighten. (Refer to diagram above for
proper steps of assembly.
• Now your appliance is ready.
• Before you place the Espresso Maker onto the base, make certain you kept the bottom
of the Boiler dry and the Support Base completely dry.
• Place the appliance onto the Support Base and plug into electrical outlet.
• The Off (O) / On (−) Switch will light up indicating there is power.
• To turn on, press the Switch from (O) to (−) ON.
• Allow the espresso to brew the entire amount of water you filled it with.
• Once the water level in the pitcher no longer rises, switch the power to (O) OFF.
• Pour the contents out and repeat steps if you wish.
• ALWAYS keep the appliance in the (O) OFF position and ALWAYS unplug from the
electrical outlet when done.
Caution: Parts will be hot. Do not handle immediately after use. Allow appliance to cool
before handling the ‘Boiler’ to clean and dry. Always dry before reassembling the espresso
maker and place back on to the unplugged Support Base.
Using Your Moka Espresso Maker:
WARNING: Hot surfaces.
1. Place the power base on a clean, flat surface. When filling with water, remove your
appliance from its power base.
2. According to the number of espresso cups desired (for 3-4 persons, max-7 oz.), fill with
enough cold water.
Loading ...
Loading ...
Loading ...