Loading ...
Loading ...
Loading ...
ENGLISH 7
+
To ensure that calibration was successful, go back to the Image
Capture screen.
+
Click the ruler icon and from the dropdown menu
select the option “Any Angle Line.”
+
Click and drag a line across the same “known value” as before.
+
If the calibration was successful, the distance you measured
should be exact to the “known value.”
+
To capture images without changing the height or magnification,
click on the Calibration icon. In the dropdown menu, select “Set
Magnification,” then “Set Capture Magnification.”
+
A pop-up window will appear. Type in the magnification shown in
the upper right corner of the main window.
D. MEASURING TOOLS
You will notice in the measuring drop down menu there are many
tools. Here is the list of measurements you can take:
MAIN
1. Any Angle: Measures from point A to point B in a
straight line.
2. Continuous Line: Measures the total distance between
multiple points. Start by measuring a straight line from
point A to point B. Then, click and drag to continue
measuring from point B to point C. (Can be repeated
as many times as you like.)
3. Radius Circle: Measures a circle’s radius. Starting at
the center, drag the cursor out to any edge.
4. Diameter Circle: Measures a circle’s diameter. Starting
at one outside edge, drag the cursor across to the
opposite edge.
5. Three Point Angle: Measures an angle between two
points, starting from a radius point or an intersection
point. Click on point A, (radius point) drag and click on
point B, then click on point C. The angle will be drawn
and the angle degree will be displayed.
SETTINGS
1. Line Properties: Changes the settings for line type,
width, size and color.
2. Text Properties: Changes the settings for font type,
size, style and color.
3. Set Units: Changes the units setting. Choose from
millimeters, centimeters, pixels or inches.
Loading ...
Loading ...
Loading ...