Loading ...
Loading ...
Loading ...
Installation Instructions
[]REHANGING THE DOORS
6.1 Rehang the fresh food door
6.1.1 Lower the fresh tood door onto the
bottom hinge pin. Be sure the washer
is in place on the pin.
6
Washer
Bracket
Modelswith a hingebracket
that has2screwholes.
Plastic
Washer
8racket
Modelswith ahingebracket
that has4screwholes.
[_REHANGING THE DOORS (CONT.)
6.2 Rehang the frozen food
compartment door
6.2.1 Lower the freezer door onto the center
hinge pin. Be sure the washer and spacer
are in place on the pin.
CenterHingePin,
PlasticWasher
andSpacer
6.1.2 Insert the pin on the center hinge into the
socket in the top of the dool: Place tbe spacer,
then the u-ashe_; on the hinge pin.
NOTE: The center hinge must be turned over
as shown when mounted on the left side.
HingePin
PlasticWasher
andSpacer
6.1.3 Tilt the door toward the cabinet. As the door is
brought into position, slide the hinge under the
head of the screw which earlier had been partly
driven into the outermost hole. Insert the
remaining screw, then tighten both screws
securely.
6.2.2 Tilt the door toward the cabinet, lifting the top
hinge so the pin fits into the socket on the top
of the doon
6.2.3 Make sure the door is slightly above the top of
the cabinet and the gap between tile doors is
even across the front. Tighten the top hinge
screws. Do not overtighten these screws--
tighten them until they are just snug, then turn
them another one-half turn.
21
Loading ...
Loading ...
Loading ...