Loading ...
Loading ...
Loading ...
Installation Instructions
IRII REVERSING THE DOOR SWING (CONT.)
[] REVERSING THE HARDWARE
4.1 Remove the base grille (if your refrigerator has
one) by pulling it straight out.
4.2 Move the bottom hinge bracket (and shim glued
to it) and plastic washer from the right side to the
left side.
Plastic Plastic
Washer Washer
Bracket
Modelswith ahingebracket
thathas2 screwholes.
Hinge
Bracket
Modelswith a hingebracket
that has4screwholes.
Switchthe hingepintothe
oppositesideofthe bracket.
4.3 Interchange hinge (and the shim glued to it) and
screws at top right with screws at top left of cabinet.
Do not tighten screws on hinge side at this time.
Installingthe hingeonthe left.
Installingthe hingeonthe right.
NOTES:
• Some hinges have four holes. Which holes you
use for installing tile hinge depends on which
side you install tile hinge.
• The outer edge of the hinge should be parallel
to the edge of the case for correct installation.
[_REVERSING THE DOOR HANDLES
5.1 Transfer fresh food door handle
5.1.1 Remove the bottom cap by pushing it
toward the bottom of the door, and
remove the screw underneath.
Remove tile two screws holding the
handle to the top of the dool:
i
5.1.2 Remove the handle.
5.1.3 Remove the screws from the right edge of the
door top and insert them into the handle screw
holes on the opposite side.
18
Loading ...
Loading ...
Loading ...