Loading ...
Loading ...
Loading ...
Installation Instructions
B INSTALLING THE WATER LINE (CONT.)
[] CONNECT THE TUBING TO THE
VALVE
Place the compression nut and ferrule (sleeve)
onto the end of the tubing and connect it to the
shutoff valve.
Make sure the tubing is fully inserted into the valve.
Tighten tile compression nut securely.
Saddle-TypeShutoffValve
\
3mpressi0nNut
PackingNut
OutletValve
[] FLUSH OUT THE TUBING
Turn the main water supply on and flush out the
tubing until the water is clear.
Shut the water offat the water valve after about
one quart (1 liter) of water has been flushed
tbrough the tubing.
[] CONNECT THE TUBING TO THE
REFRIGERATOR
NOTES:
• Before making the connection m the refrigerator,
be sure the refrigerator power cord is not
plugged into the ,a-all outlet.
• We recommend installing a water filter if your
water supply has sand or particles that could clog
tile screen of tile refi'igerator's water valve. Install
it in tile water line near the refrigerator:
[] CONNECT THE TUBING TO THE
REFRIGERATOR (CONT.)
9.1 Remove the access cover.
9.2 Remove the plastic flexible cap fi'om the
water valve.
9.3
Place tile compression nut and ferrule (sleeve)
onto the end of the tubing as shown.
Insert the end of tbe copper tubing into the
water valve connection as far as possible.
While holding the tubing, tighten the fitting.
Fasten the copper tubing into the clamp
provided to hold it in a vertical position.
You may need to pry open the clamp.
1/4" CopperTubing
1/4" Compression
/
fFerrule(sleeve)
9.4 Reattach the access covm:
_J
14
Loading ...
Loading ...
Loading ...