Loading ...
Loading ...
Loading ...
Troubleshooting
Symptom Action
Power does not turn on.
0
Is the AC adapter properly connected?
0
Is the battery charged?
0
Is the power turned on immediately after it is turned off?
Make sure to wait for an interval of at least 5 seconds before turning
on the power again.
Unable to start recording.
0
Is
the record trigger button/lock switch on the handle turned on? O
0
Is the write-protect switch of the SD card turned on?
Make sure that the write-protect switch is turned off.
0
Is the camera recorder set to the Camera mode?
Use the [MODE] selection button to switch to the Camera mode.
0
Is the SD card inserted compatible with the recording format?
Camera image is not output on
the LCD monitor and
viewfinder screen.
0
Is the camera recorder set to the Camera mode?
Use the [MODE] selection button to switch to the Camera mode.
Playback does not start after
selecting a clip thumbnail and
pressing the Set button (R).
0
Is the selected clip a playable clip?
Playback
is not possible if the clip has a different video format setting.
Images on the LCD monitor
and viewfinder screen appear
dark or blurred.
0
Readjust the brightness of the LCD monitor and viewfinder.
0
Is the [
ND FILTER] switch set to “1/16”?
0
Is the iris closed?
0
Is the shutter speed setting too high?
0
Is the amount of peaking too little? Use the
[LCD/VF Peaking] menu
to adjust the contour for the LCD monitor image and viewfinder image
by adjusting the contour of the viewfinder image.
(The contour of the LCD monitor will also be adjusted at the same
time.)
Adjust using [Main Menu] B [LCD/VF] B [LCD/VF Peaking].
The [CH1/CH2]
recording level
adjustment knob does not
work. O
0
Is the [CH1/CH2 AUTO/MANUAL] switch set to “AUTO”?
0
Is Full Auto enabled?
Is [
A/V Set] B [Audio Set] B [Audio On FULL AUTO] set to “Auto” in
Full Auto mode?
SD card cannot be initialized
(formatted).
0
Is the write-protect switch of the SD card turned on?
Make sure that the write-protect switch is turned off.
Battery alarm appears even
after loading a charged
battery.
0
Is the battery too old?
The time code and user’s bit
are not displayed.
0
Even in Camera mode or Media mode, the time code and user’s bit
may not be displayed depending to the type of display.
0
Is [LCD/VF] B [Display Settings
] B [TC/UB] set to “Off”? To display
the time code or user’s bit, set it to “TC” or “UB”.
The date and time are not
displayed.
0
The date and time are only displayed on the Display 1 and Display 2
screens in the Camera mode (during shooting).
0
Is [System] B [Record Set
] B [Time Stamp] set to “On”? To display
the date and time, set it to “Off”.
Troubleshooting
37
Others
Loading ...
Loading ...
Loading ...