Loading ...
Loading ...
Loading ...
Swapping the Home City
Time and Dual Time
1. Enter the Dual Time Mode.
l
Navigating Between Modes
2. Hold down (E) for at least two seconds.
This swaps the Home City time and Dual
Time.
After swappingBefore swapping
Dual Time
Current location time
Dual TimeCurrent location time
Note
●
This function comes in handy when
you need to move to another time
zone. For details about how to use it,
go to the section below.
l
Moving to Another Time Zone
Alarms and Hourly Time
Signal
The watch will beep when an alarm time is
reached. You can set up to five different
alarms. The hourly time signal causes the
watch to beep every hour on the hour.
Getting Ready
Enter the Alarm Mode.
l
Navigating Between Modes
Configuring Alarm Settings
1. Press (D) to scroll through alarm numbers
([AL1] to [AL5]) until the number of the
alarm you want to configure is displayed.
Alarm number
2. Hold down (A) for at least two seconds.
Release the button when the hour digits
start to flash.
Hours
3. Use (D) and (E) to change the hour setting.
●
If you are using 12-hour timekeeping,
[P] indicates p.m.
4. Press (C).
This causes the minutes digits to flash.
Minutes
5. Use (D) and (E) to change the minute
setting.
6. Press (A) to exit the setting screen.
Note
●
A beeper will sound for 10 seconds to
let you know when the alarm time is
reached.
Enabling/Disabling an Alarm
or the Hourly Time Signal
1. Press (D) to scroll through alarm numbers
([AL1] to [AL5]) and the hourly time signal
([SIG]) screens until the one you want to
configure is displayed.
Alarm or hourly time signal
2. Press (E) to toggle the displayed alarm or
the hourly time signal between on and off.
[On]: On
[－－]: Off
Operation Guide 3464
15
Loading ...
Loading ...
Loading ...