Loading ...
Loading ...
Loading ...
7
ENG
Using the Timer as a Minute Minder
If you are not selecting any cooking zone
Make sure the cooktop is turned on.
Note: you can use the minute minder even if you’re not
selecting any cooking zone.
Touch the timer control, the timer indicator will flash; Adjust
the timer setting by touch the “-” or “+” controls. The minute
minder indicator will start flashing and will show in the timer
display
Touching the “-” and “+” together, the timer is cancelled,
and the “--” will show in the minute display.
When the time is set, it
will begin to count down
immediately. The display
will show the remaining
time and the timer
indicator will flash for 5
seconds
Buzzer will beep for 30
seconds and the timer
indicator shows “- -” when
the setting time finished.
Hint:
• Touch the “-” or “+” control of the timer once to decrease or
increase by 1 minute.
• Touch and hold the “- “or “+” control of the timer to
decrease or increase by 10 minutes.
• If the setting time exceeds 99 minutes, the timer will
automatically return to 0 minute.
Setting the timer to turn one or more cooking zones off
Set one zone
Touch the zone you want
to set
Touch the timer control, the
timer indicator show “10”
Set the time by touching the
“- “or “+” control of the timer
Touching the “-” and “+” together, the timer is cancelled,
and the will show “--” in the minute display.
When the time is set, it
will begin to count down
immediately. The display will
show the remaining time
and the timer indicator flash
for 5 seconds
When cooking timer
expires, the corresponding
cooking zone will be
switched off automatically.
The display will show ”H”
which means hot
Note:
a. The red dot next to power level indicator will illuminate
indicating that zone is selected.
b. If you want to change the time after the timer is set, you
have to start from step 1.
c. The method for setting two zones is the same as mentioned
above.
Setting the timer to turn more than one cooking zone off
a. If more than one heating zones use this function, the
timer indicator will show the lowest time. (e.g. zone 1#
setting time of 5 minutes, zone 2# setting time of 15
minutes, the timer indicator shows “5”.)
NOTE: The red dot next to power level indicator will flash.
(set to 5 minutes)
(set to 15 minutes)
b. Once the countdown timer expires, the corresponding
zone will switch off. Then it will show the new min. timer and
the dot of corresponding zone will flash.
Loading ...
Loading ...
Loading ...