Loading ...
Loading ...
Loading ...
TP-6880 2/21 9Introduction
Introduction
This manual provides operation and maintenance
instructions for residential/commercial model
8/10/12RESV and RESVL generator sets equipped with
Kohler RDC2 generator set/transfer switch controllers.
See Figure 1. The RDC2 controllers control the
generator set and the optional Model RXT transfer
switch.
NOTE: The DC2 controller has been discontinued.
Model 8/10/12RESV and RESVL generator sets built in
2019 are equipped with the RDC2 controller.
This generator set is approved for use in stationary
applications in locations served by a reliable utility
power source. Have the generator set installed by an
authorized distributor/dealer or service technician.
Refer to TP-6879, Installation Manual, for installation
instructions.
Information in this publication represents data available
at the time of print. Kohler Co. reserves the right to
change this publication and the products represented
without notice and without any obligation or liability
whatsoever.
Read this manual and carefully follow all procedures
and safety precautions to ensure proper equipment
operation and to avoid bodily injury. Read and follow the
Safety Precautions and Instructions section at the
beginning of this manual. Keep this manual with the
equipment for future reference.
The equipment service requirements are very important
to safe and efficient operation. Inspect the parts often
and perform required service at the prescribed intervals.
Obtain service from an authorized service distributor/
dealer to keep equipment in top condition.
Figure 1 RESV/RESVL Generator Set
List of Related Literature
Figure 2 identifies related literature available for the
generator sets covered in this manual. Only trained and
qualified personnel should install or service the
generator set.
Generator Set Literature Part Number
Spec Sheet, 8RESV(L) G4- 252
Spec Sheet, 10/12RESV(L) G4- 254
Installation Manual, Model
8/10/12RESV/RESVL Generator Set
TP-6984
Transfer Switch Literature
Operation/Installation Manual, Model
RXT Automatic Transfer Switch
TP-6807
Operation/Installation Manual, Model
RDT Automatic Transfer Switch
TP-6345
Accessory Literature
Installation/Technical Manual, OnCue
Plus Software
TP-7007
User Guide, OnCue Plus Software TP-7006
Operation Manual, SiteTech Software TP-6701
Installation Instructions, Programmable
Interface Module (PIM)
TT-1584
Installation Instructions,
Battery Heater Kit
TT- 1634
Instructions, Firmware Update Using
USB Utility
TT-1636
Instructions, Load Shed Kit TT-1609
Installation Instructions,
Remote Emergency Stop Switch
(Lockable) TT- 1795
Figure 2 Related Literature
Loading ...
Loading ...
Loading ...