Loading ...
Loading ...
Loading ...
TPMP-6880 2/21 Appendix 75
LCD Display
The controller is equipped with a two-line x 16 character backlit digital display with adjustable contrast. When the
generator set is running, the messages shown in Figure 5-6 are displayed. When the system is in AUTO, the LCD
display steps through the status messages shown in Figure 5-7.
When a fault or warning condition exists, the controller will show the corresponding message. See Section 2.5 for more
information on fault and warning messages.
The display backlight turns off after about a minute of no activity. The backlight turns on when a button is pressed or
when the generator set starts.
Running
ATS: Normal *
Voltage: 240V
Freq: 60.0Hz
Engine: 123F
Oil Pressure: OK
Battery 12.3V
Runtime: 12345.6 h
Next Exercise:
7d 6h 42m
Sample data shown.
Active Alert
(if any)
OnCue Status:
Disconnected
* Model RXT ATS required
OnCue status is displayed only if OnCue password has been reset.
Figure 5-6 Status Displays, Generator Running
Loading ...
Loading ...
Loading ...