Loading ...
Loading ...
Loading ...
Installation
Instructions
Range
I If you have questions, call 800.GE.CARES or visit our Website at: ge.com I
In the Commonwealth of
Massachusetts:
• This product must be installed bg a licensed plumber
or gas fitten
• When using ball-tgpe gas shut-off valves, theg shall
be the T-handle tgpe,
• A flexible gas connector, when used, must not
exceed ] feet.
BEFORE YOU BEGIN
Read these instructions completely and carefully.
Installation of this range must conform with
local codes, or in the absence of local codes,
with the National Fuel Gas Code, ANSI
Z223.1/NFPA.54, latest edition. This range has
been design-certified by CSA International
according to ANSI Z21.1, latest edition and
Canadian Gas Association according to
CAN/CGA-I.1 latest edition.
As with ang appliance using gas and generating
hecut, there curecertcuin scufetg precautions gou
should follow. You will find these precautions in the
Important Safety Information section in the front
of this manual. Read them ccurefullg,
•IMPORTANT-scuvetheseinstructionsfor
local electrical inspector's use.
•IMPORTANT- Observecullgoverning codes
and ordinances.
• Note to Installer- Be sure to leave these
instructions with the ConsumeE
• Note to Consumer - Keep these instructions for
future reference
• Note - This appliance must be properly grounded
• Servicer- The electrical diagram is in an envelope
attached to the back of the range
• Skill level- Installation of this appliance requires
basic mechanical skills.
• Proper installation is the responsibilitg of the
instcullen
• Product failure due to improper installation is not
covered under the Warrantg.
29
Loading ...
Loading ...
Loading ...