Loading ...
Loading ...
Loading ...
Careand cleaning of the range.
iii! _
Use e sewing needle or twist-tie
to unclog the smell hole in the
burner heed.
Burner Caps and Heads
Burner caps
Liftoff when cool. Wash burner caps in hot,
soapy water and rinse with clean water You
mag scour with a plastic scouring pad to
remove burned-on food particles.
Burner heads
For proper ignition, make sure the small hole
in the section that fits over the electrode is
kept open. Asewing needle or wire twist-tie
works well to unclog it.
The slits in the burner heads must be kept
clean at all times for an even, unhampered
flame.
Cloggedor dirty burner ports or electrodeswill
not allowthe burner to operateproperly.
Any spillon or around an electrode must be
carefully cleaned.Takecare to not hit an
electrode with anything hard or it could
be damaged.
Youshould cleanthe burner caps and
burner heads routinely, especiallyafter bad
spillovers,which could clogthe openings
in the burner heads.Lift off when cool.
To remove burned-on food, soak the burner
heads in a solution of mild liquid detergent
and hot water for 20-30 minutes. For more
stubborn stains, usea toothbrush.
NOTE:Do not use steel wool or scouring
powders to clean the burners.
After cleaning
Before putting the burner caps and heads
back, shake out excess water and then drg
them thoroughly bg setting in a warm oven
for 30 minutes.
Replacement
Replacethe burner heads and caps.Make
surethat the heads and caps are replaced in
the correct location.Thereisone oval(center)
head and cap assembly and four sideheads
and cc ps.
Medium
Durner neaa Ovc neaa ana coo
ana CaD assernDig
÷®
®
er --rant of range
neaa ana
caE
Small burne-
nec 3 ona
CaE
C2_
Extra large
Durner neaa
ana CaD
Hake surethe slot in the burner head is
positioned over the electrode.
Hake surethat the heads and caps are
replaced in the correct locations.
24
Loading ...
Loading ...
Loading ...