Loading ...
Loading ...
Loading ...
5
Operating Instructions and Parts Manual 24883/24884
24"/30" OSCILLATING WALL FAN
OPERATING INSTRUCTIONS
1. Adjust the desired speed by pulling the chain switch
(Stop – Low – Medium – High).
2. To adjust the airflow upward or downward, loosen the tilting
knobs on both sides of the fan head and tilt the fan head to the
desired angle. Tighten the knobs to lock in place.
NOTE: It is normal for the motor to feel warm to the touch during
operation. The motor is thermally protected and will automatically
shut off when it overheats. If this happens, immediately
disconnect the fan from the power outlet.
OSCILLATION INSTRUCTIONS
CAUTION
Turn the fan off before adjusting the fan oscillation.
NOTE: The screw is preset at position A at the factory.
To make the fan oscillate:
1. Loosen the screw and move it as shown in Figure A.
2. Tighten the screw back.
To stop oscillation:
1. Loosen the screw and move it as shown in Figure B.
2. Tighten the screw back.
Figure B
Figure A
11/16
2016 OEMTOOLS
®
Loading ...
Loading ...
Loading ...