Loading ...
Loading ...
Loading ...
4
Operating Instructions and Parts Manual 24883/24884
24"/30" OSCILLATING WALL FAN
STEP 4
Assemble the Fan Blade onto the Motor Shaft by tightening the
two screws.
Make sure the screws are secured tightly.
STEP 5
Attach the Front Guard to the Rear Guard using the clips on the
rim of the Front Guard.
STEP 6
Secure the Front Guard and Rear Guard by tightening a Screw,
Washers and a Nut on the bottom.
STEP 7
Attach the Fan assembly to the Bracket using the M12 x 35 bolt,
Washer and Hex Nut M12.
Fasten M8 x 25 Screw for holding the Fan assembly vertically on
the Bracket.
STEP 8
Loosen the M8 x 25 bolt to adjust the desired tilt angle of the Fan
Assembly and then tighten once at the desired angle.
11/16
2016 OEMTOOLS
®
Loading ...
Loading ...
Loading ...