Loading ...
Loading ...
Loading ...
TP-6880 2/21 15Section 1 Descriptions and Service Views
1.7 OnCue Plus Generator
Management System
The Kohler OnCue Plus Generator Management
System is now included with the generator set. The
OnCue Plus System allows monitoring and control of
your generator set from your home or other location with
Internet access using a computer or mobile device.
OnCue Plus can be configured to send email or text
message notifications in the event of a generator set
fault.
You can also use Google Assistant or Amazon Alexa
and your smart device to control your generator. Use
voice commands to check your generator’s status,
check for active alerts, and start or stop an exercise.
See the OnCue Plus User Guide, TP- 7006, for simple
setup instructions and voice commands
OnCue Plus Wireless is also available. OnCue Plus
Wireless works with the customer’s wireless ethernet
router and does not require the installation of a network
cable between the generator set and the customer’s
router/modem.
1.8 Accessories
The following optional accessories are offered for the
RESV and RESVL generator sets.
1.8.1 Carburetor Heater
An optional carburetor heater is recommended for
improved cold starting in locations where the ambient
temperature drops below 0C (32F). The carburetor
heater prevents condensation and carburetor icing. The
heater requires a continuous source of AC power.
See the generator set Installation manual for more
information.
Voltage 120 VAC
Thermostat ON 4 ± 4C (40 ± 7F)
Thermostat OFF
16 ± 3C (60 ± 5F)
Figure 4 Heater Specifications, 20kW Models
1
GM57968
1. Heating element
2. 1/8 NPT threaded fitting
3. Power cord disconnect plug
4. Thermostat
5. 120 VAC plug (GM57968)
6. 240 volt 3-pin plug (GM88228)
3 4 52
GM88228
NO TAG
Figure 5 Carburetor Heater
1.8.2 Battery Heater Kit
The battery heater kit contains a heating wrap to help
warm the battery in cold climates. See Figure 6. The
battery heater is equipped with a thermostat that turns
the heater on at 16- 18C (60- 65F) and off at 27C
(80F). Battery heaters are recommended for regions
where the temperature regularly falls below 0C (32F).
Note: Battery heaters are compatible with all
Kohler-supplied lead-acid batteries.* For other
battery types, check the battery manufacturer’s
instructions for any restrictions regarding the use
of battery heaters.
The battery heater requires a source of AC power. Verify
that AC power is connected to the generator set as
described in the generator set Installation Manual. The
circuit must be backed up by the generator set to provide
power at all times.
1. Battery heater wrap
2. Retaining strap or cable ties (included)
3. Power cord
1
2
3
Figure 6 Battery Heater (typical)
Loading ...
Loading ...
Loading ...