Lexmark CX522ADE User's Guide PDF

Loading ...

This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for

which it is designed. Telecom will accept no responsibility should diculties arise in such circumstances.

The decadic (or pulse) dialing on this device is unsuitable for use on the Telecom network in New Zealand.

For correct operation, the total of all the Ringer Equivalence Numbers (RENs) of all parallel devices connected

to the same telephone line may not exceed 5. The REN of this device is located on the label.

This device uses an RJ-11C modular connector. Contact your point of purchase if a BT adapter is required. The

Lexmark part number is 80D1873.

Some parameters required for compliance with Telecom's telepermit requirements are dependent on the

equipment associated with this device. The associated equipment shall be set to operate within the following

limits for compliance to Telecom's speciﬁcations:

• There shall be no more than 10 call attempts to the same number within any 30 minute period for any single

manual call initiation, and

• The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt

and the beginning of the next call attempt.

• The equipment shall be set to ensure that automatic calls to dierent numbers are spaced such that there

is not less than 5 seconds between the end of one call attempt and the beginning of another.

Japanese telecom notice

The installed optional modem is in compliance with Japanese Telecommunication Law and has been Certiﬁed

by JATE, with the following Certiﬁcation Number:

A18-0046001 or A11-0160001

Lexmark International, Inc.

LEX-M14-002 or LEX-M03-002

A18-0046001 or A11-0160001

Using this product in Switzerland

This product requires a Swiss billing tone ﬁlter (Lexmark part number 80D1877) to be installed on any line which

receives metering pulses in Switzerland.

Utilisation de ce produit en Suisse

Cet appareil nécessite l’utilisation d’un ﬁltre de tonalité de facturation suisse (nº de référence Lexmark :

80D1877) devant être installé sur toute ligne recevant des impulsions de comptage en Suisse.

Notices 284

Loading ...

Lexmark CX522ADE