Loading ...
Loading ...
Loading ...
Setting Surface Controls
ABOUT THE CE M(C G SS COOKTOP
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
The ceramic cooktop has radiant surface elements located below the
surface of the glass. The design of the ceramic cooktop outlines the area
of the surface element underneath. Make sure the diameter of the pan
matches the diameter of the element outline on the cooktop (See Figs. 1
&2).
Heat is transferred up through the surface of the cooktop to the cookware.
Only flat-bottom cookware should be used. The type and size of cookware,
the number of surface elements in use and their settings a re all factors that
will affect the amount of heat that will spread to areas beyond the surface
elements. The areas surrounding the elements may become hot enough
to cause burns.
[] [] [] [] []
Fig.1 - 30" Model - Cooktop Appearance
ABOUT THE D(ANT SURFACE Fig. 2 -36" Model -C00kt0p Appearance
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
The element temperature rises gradually and evenly. As the temperature rises, the element will
glow red. To maintain the selected setting, the element will cycle ON and OFF. The heating
element retains enough heat to provide a uniform and consistent heat during the OFF cycle. For
efficient cooking, turn OFF the element several minutes before cooking is complete. This will
allow residual heat to complete the cooking process.
Loading ...
Loading ...
Loading ...