Loading ...
Loading ...
Loading ...
13
EMPTYING THE COLLECTION TANK
1. Verify that the power cord is disconnected from the outlet (Fig. 1).
2. Disconnect the hose from the vacuum (Fig. 2).
3. Undo the latches and remove the powerhead from the collection tank (Fig. 3 & 4). Place powerhead
on a soft, clean surface upside down.
4. Clear all dirt or debris from the collection tank and hose into a proper waste container (Fig. 5).
5. Clean or replace the lters.
6. Check the hose, accessories, and power cord to verify that they have not been damaged.
7. Place the powerhead back on collection tank and secure latches.
IMPORTANT!
Clean or change the lter regularly for best performance. ALWAYS USE THE REUSABLE
CLOTH FILTER FOR DRY VACUUMING. If the machine is used without the reusable cloth lter, the
motor will burn out and the warranty will be voided. Always keep spare lters on hand.
NOTICE! The lters included are made of high-quality materials designed to stop small dust particles.
The reusable cloth lter should be used for dry pick-up only. A dry reusable cloth lter is necessary to
pick up dust. If the reusable cloth lter is wet, it will clog quickly and be dicult to clean. Handle the
lter carefully when removing it for cleaning and replacing it. Check the lters for tears or small holes.
A small hole can let dust pass through and out of the lter. Do not use a lter with holes or tears in it;
replace it immediately.
STORAGE
Before storing your vacuum, the collection tank should be emptied and cleaned. The accessories
should be cleaned and stored so they can be readily available when needed. Store the wet/dry
vacuum indoors.
REPAIRS
Repairs for this wet/dry vacuum should be performed only by qualied service personnel using only
identical replacement parts.
MAINTENANCE
1 2 4 5
3
WARNING: ALWAYS DISCONNECT THE PLUG FROM THE POWER OUTLET BEFORE
REMOVING THE POWER HEAD FROM COLLECTION TANK.
Loading ...
Loading ...
Loading ...