Loading ...
Loading ...
Loading ...
9
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | tempo.org/support
Before first use
• Unpack this bike, making sure to remove all parts from the packaging carton.
The carton staples may be sharp, take care that you do not hurt yourself when
reaching into the carton to remove parts.
• Packaging materials: Keep the original packaging materials in a safe place.
It will help prevent any damage if the product needs to be transported in the
future, and you can use it to store the bike when it is not in use. In the event
that the carton is to be disposed of, please recycle it where possible.
• Unwrap all parts carefully. If you are using a retractable utility knife or scissors
when unwrapping the parts, take care that you do not scratch the metal parts
of the bike or pierce the tyres. Remove the plastic covers from the front wheel
nuts, base of the fork and stem pillar.
Plastic wrapping can be a suffocation hazard for babies and young children,
so ensure all packaging and protective materials are out of children's reach
and disposed of safely.
• Key removal: The bike comes with two keys which are attached to the brake
cables. Please ensure you remove the keys and keep them in a safe place, a
key is required for locking the battery in place and unlocking it.
Getting Started
• Assembly requirements: The bike
comes partially assembled and requires
full assembly by a bicycle mechanic or
competent person. The stem needs to be
assembled with an M6 allen key (35-45 Nm)
and the pedals with an M15 wrench (20-26
Nm). A multipurpose tool (containing the
tools required for assembly) is supplied.
Other torque requirements for the different
part assemblies are listed on page 5. If you do not have a torque wrench, for
reference 5-10 Nm is only just snug. To achieve approx. 40 Nm, use your index
finger to hold the allen key, and then turn it using the strength from your whole
arm. As soon as your finger starts to struggle, stop turning. It should feel very
solid, but should not take your entire body strength to get it to this point. One
mistake people often make is to over-tighten.
• Inspect the cord and plug of the battery charger for damage or wear before
each use. Do not use the charger if it is not working or if its cord is damaged.
In case of damage, please contact our after sales support centre.
• Read all instructions in this manual and make sure you understand all warnings.
To familiarise yourself with all the parts and operating principles of the bicycle,
please refer to the Product Overview and the remaining sections in this manual.
Also pay attention to the safety instructions on the previous pages.
Loading ...
Loading ...
Loading ...