Loading ...
Loading ...
Loading ...
START AND STOP
Control before starting
• Inspect the working area. Remove objects that can be
thrown.
• Check the blades. Never [=_
use blades that are dull,
cracked or damaged.
• Check that the hedge
trimmer is in full
working order. Check
that all nuts and bolts are
tightened correctly.
• Make sure the gearbox is lubricated correctly. See the
section "Lubricating the blades".
• Ensure the blades always stop when the engine is idling.
• Only use the machine for what it is intended for.
• Ensure that the handle and safety functions are in order.
Never use a machine that lacks a part or has been modified
outside of the specifications.
Start and stop
Start
Cold engine
IGNITION:
Set the stop switch to the
start position.
CHOKE:
Set the choke control in the
choke position (A).
The choke position is also
the automatic start throttle
position.
AIR PURGE:
Press the air purge
diaphragm repeatedly until
fuel begins to fill the
diaphragm. The diaphragm
need not be completely
filled.
Warm engine
IGNITION:
Set the stop switch to the
start position.
CHOKE:
Set the choke control in the
choke position and then
back again to its original
position (B)
In this way only the start
throttle is applied with no
choke.
AIR PURGE:
Press the air purge
diaphragm repeatedly until
fuel begins to fill the
diaphragm. The diaphragm
need not be completely
filled.
@
I+1
Press the machine body
against the ground using
your leI_hand (NOTE! Do
not use your foot). Grip the
starter handle with your
right hand and slowly pull
the starter cord out until
you feelsome resistance,
(the starter hooks grip) now
quickly and powerfully pull
the cord.
Immediately press the choke
control in when the engine
fires and repeat until the
engine starts. When the
engine starts, quickly apply
full throttle and the start
throttle will automatically
disengage.
@
NOTE! Do not pull the starter cord out completely and do
not release the starter cord from the fully extended position.
This can damage the hedge trimmer.
Stop
The engine isstopped by
switching the ignition off
using the stop switch.
English - 1 3
Loading ...
Loading ...
Loading ...