Husqvarna 225H75 Brush Wacker

Operator's Manual - Page 12

For 225H75. Also, The document are for others Husqvarna models: 225H60

PDF File Manual, 19 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
FUEL HANDLING
Fuel mixture
NOTE_
The machine is fitted with a two-stroke engine and must
always be run on a mixture of petrol and two-stroke oil. It is
important to measure the quantity of oil accurately, to ensure
the correct mixture ratio. Small discrepancies in the amount of
oil have a great bearing on the proportions of the fuel mixture
when mixing small amounts of fuel.
Gasoline
NOTE]
Mways use an oil-mixed
quality petrol (at least 87
octane). If your machine is
equipped with a catalytic
converter, (see "technical
data') an unleaded, oil
mixed quality petrol should
always be used. A leaded
petrol will destroy the
catalytic converter.
This engine is certified to
operate on unleaded
gasoline.
The lowest recommended
octane rating is 87. lfyou
run the engine on lower
octane rating than 87 so-
called "knocking" can
occur. This leads to an
increased engine
temperature, which can
result in a serious engine
breakdown.
When working at
continuous high revs a
higher octane rating is
recommended.
6
6
Two-stroke oil
For the best results use HUSQVARNA two-stroke oil,
which has been specially developed for HUSQVARNA's
small, two-stroke engines. Mixing ratio 1:50 (2%).
Never use two-stroke oil intended forwater cooled outboard
motors, so-called outboard motor oil.
Never use oil intended for four-strokeengines.
Mixture
Always mix gasoline and oil in a clean container intended
for fuel.
Always start by filling half the quantity of gasoline required.
Then add the entire oil quantity. Mix (shake) the fuel
mixture. Fill the remaining quantity of gasoline.
Mix (shake) the fuel mixture carefully before filling in the
machine's fuel tank.
Do not mix more than max. one month's supply of fuel.
If the clearing saw is not used for a long period of time, the
fuel tank should be emptied and cleaned.
This engine is certified to operate on unleaded gasoline.
Fuelling
Clean around the fuel
cap. Contamination in
the tank can disrupt
operations.
Ensure that the fuel is
well mixed by shaking the
container before filling
the tank.
Gasoline Oil
2%(1:50)
Lit. Lit.
5 0,10
10 0,20
15 0,30
20 0,40
US US
gallon ft.oz
1 2 1/2
2 1/2 6 1/2
5 12 7/8
Min. 3 m
(10 ft)
12 - English
Loading ...
Loading ...
Loading ...