Loading ...
Loading ...
Loading ...
EXTENSION PORT
The Extension port is located on the back of the camera body.
The 9-pin 0B ODU Extension port supports RS-232 RX, RS-232 TX, and a General Purpose Input (GPI) trigger (active-
low switch closure), General Purpose Output (GPO), Timecode, and Genlock. The connector also offers auxiliary 5 Volt
power out, with a maximum sustained current draw of 500 mA.
To operate the GPI contact closure style trigger, short Pin 6 (GPI) to Pin 9 (ground).
Figure: Front Face of the Extension port (Looking at the Camera)
NOTE: The required mating connector is 9-Pin 0L Straight Plug Connector (ODU, part# SX0L0X-P09MCC0-0001).
9-PIN 0B ODU AUXILIARY PORT PINOUT
PIN SIGNAL DESCRIPTION
1 5 V AUX 5 Volt AUX (500 mA Max) enabled using the Power menu
2 Timecode Out Timecode Out – SMPTE 12M
3 GPO General Purpose Out, Tally or Sync, 3.3 Volt Logic Level
4 UART TX RS-232 Transmit
5 UART RX RS-232 Receive
6 GPI General Purpose In, 3.3 Volt Logic Level
1
7 Timecode In Timecode In – SMPTE 12M
8 Genlock Tri-Level Genlock In (SMPTE 296M and 274M)
9 GND Signal and Power Ground
1. The signal path includes a resistor pulling the signal high, which is designed to work with a closure switch connected to GND.
COPYRIGHT © 2 02 0 RE D.COM, LLC 95 5-019 0, R E V 1 .2 | 1 71
KOMODO OPERATION GUIDE
Loading ...
Loading ...
Loading ...