Loading ...
Loading ...
Loading ...
KOMODO POWER ADAPTOR
The KOMODO 45 Watt AC power Adaptor connects to the camera's DC-Input port to provide DC power for operating
the camera and for recharging the attached Batteries.
The camera charges the batteries when the camera is off and the power Adaptor is connected.
AUTO BOOT ON POWER
The camera supports the Auto Boot on Power feature. This means that if all power sources are removed, and the
Power Switch is set to ON, then when a power source is attached, the camera turns on.
POWER CONSUMPTION
The camera draws various levels of power depending on the configuration and operating conditions. The power
consumption guidelines are:
The camera uses between 20 Watts and 24 Watts of power in its basic configuration
Additional power may be necessary based on ambient temperature and changes to camera firmware in future
updates (up to an additional 5 Watts)
Up to an additional 8 Watts might be required for additional accessories attached to the top pogo port and the EXT
port
Maximum power consumption is not expected to exceed 37 Watts
POWER PRIORITY
When multiple power sources are connected to the camera, power consumption is prioritized in this sequence:
1. Any power supply connected to the DC IN port.
2. Attached battery in the left slot (facing the back of the camera) then the battery attached in the right slot.
WARNING: Always attach the power or batteries before attaching the SDI BNC cable. Always remove the SDI BNC
cable before removing the power or batteries.
COPYRIGHT © 2 02 0 RE D.COM, LLC 95 5-019 0, R E V 1 .2 | 1 41
KOMODO OPERATION GUIDE
Loading ...
Loading ...
Loading ...