Loading ...
Loading ...
Loading ...
Preparing and using for the first time
Level Display German
Degree (°dH)
Degrees of general
hardness (°dGH)
Parts per
million (ppm)
Indicator Strip number
of ‘reddish’ fields
Not active – – – –
Very soft water <3 <3 < 53�4 None
Soft water > 4 > 4 > 71 1
Hard water > 8�4 > 8�4 > 150 2
Very hard water > 14 > 14 > 250 3
If the machine is operated with a defective power cord, there is a
danger of potentially fatal electric shock�
T Never use a machine which is damaged�
T Never use a machine which has a defective power cord�
Milk, sparkling mineral water or other liquids can damage the
water tank or the machine�
T Only fill the water tank with fresh, cold water�
E The water volume is given as standard in ‘oz’� You can
change this setting to ‘ml’ in programming mode (see
Chapter 6 ‘Permanent settings in programming mode’)�
Precondition:The bean container has been filled�
T For machines with a plug-in power cord: Connect the power
cord to the machine�
T Insert the power plug into a power socket�
T Press the On/Off button Q to switch the E8 on�
‘Choose language’
T Press the 0 or 9 button until the desired language is displayed,
e�g� ‘English’�
T Press the ‘Save’ button�
‘Saved’ appears briefly on the display�
‘Water hardness’
E If you do not know the hardness of your water, you must
find this out first (see chapter 3 ‘Preparing and using for the
first time – Determining the water hardness’)�
First-time use
J WARNING
NOTICE
Loading ...
Loading ...
Loading ...