Loading ...
Loading ...
Loading ...
5
ASSEMBLY INSTRUCTIONS
2
1
2. Loosen all four mounting bracket screws located on the
mounting bracket and completely remove the two screws
from the round holes in the canopy. Save the screws for
later. Remove the canopy from the mounting bracket.
Then, install the mounting bracket to the outlet box (sold
separately) using the screws and washers provided with
the outlet box.
WARNING: To reduce the risk of re, electric shock,
or personal injury, mount to the outlet box marked
“acceptable for fan support” and use the mounting screws
and washers provided with the outlet box.
For downrod installation, skip to Step 4.
Mounting Bracket Screw
Shipping Block
Fitter Plate
Fitter Plate Screw
3. Loosen the four tter plate screws preassembled to
the tter plate. Then, turn the orange shipping block
counterclockwise and remove. Discard the shipping block.
1. Turn OFF the electrical power at the main fuse or circuit
breaker.
DANGER: Failure to disconnect the power supply prior to
installation may result in serious injury or death.
3
Downrod
Clip
Set Screw
Yoke
Downrod
Pin
4. Remove the downrod clip and downrod pin from the
downrod. Then loosen, but don’t remove the two set
screws in the yoke.
4
Loading ...
Loading ...
Loading ...