Loading ...
Loading ...
Loading ...
30
Instructions for Use
Select the heating function, Fig. 27.
Set the thermostat to the desired
temperature. When this temperature is
reached, the appliance turns itself off
automatically. It comes back on again when
the temperature drops 2-3ºC.
Warning!
Do not cover the air intakes or outlets on
your appliance!
When the appliance or the model is fitted
with optional filters, we recommend that
these be left on regardless of the function
selected (cooling, dehumidification, air
purification) in order to purify the air more
effectively.
Note:
Due to the internal configuration of the
PAM0520 models, air is also expelled
outdoors when the appliance is set to the
ventilation function. In order to reduce the
noise produced, it is recommended that
you remove the air expulsion tube.
Heating
(only on PAM0530)
When set to position , the appliance heats
the air in the room until the temperature set by
the user is reached. The air in the room is
purified at the same time.
Plug the appliance into the mains electricity
supply.
Put the air expulsion tube in the same position
as for dehumidification.
This air director is not installed on the
appliance on PAM0530 models. The
manufacturer recommends that an air
director be previously installed in order to
distribute the air flow better. The director is
fitted as shown in the following figures.
20º 30º
20º 30º
Fig. 25
Fig. 26
Fig. 27
Loading ...
Loading ...
Loading ...