Loading ...
Loading ...
Loading ...
If a problem occurs ...
32 | RS 195
Leaving the range of the transmitter
The range of the transmitter largely depends on environmental conditions
such as wall thickness, wall composition etc. If the headphones leave the
range of the transmitter, the audio first cuts out occasionally until it finally
cuts out completely.
If you re-enter the transmission range within 5 minutes, the connection is
automatically re-established.
If you spend more than 5 minutes outside the transmission range, the
headphones switch off automatically.
Clearing the pairing settings from the headphones
1 Press the Volume +/– buttons simultaneously and hold for 2 seconds.
The HDR status LED blinks red rapidly.
2 Press the HDR power button while holding the Volume +/– buttons
pressed. Release all 3 buttons.
The HDR status LED lights up green or red, depending on the battery
condition, and starts blinking slowly. The pairing settings are cleared
from the headphones.
MODEM
O
D
E
M
O
D
E
1 2
2s
Loading ...
Loading ...
Loading ...