Loading ...
Loading ...
Loading ...
Putting the RS 195 into operation
RS 195 | 13
Connecting the transmitter to audio sources
You can simultaneously connect two audio sources (e.g. a TV and a stereo
hi-fi system) to the transmitter. The transmitter features a digital as well
as an analog audio input. If you connect two audio sources, you can toggle
between them using the
AUDIO INPUT SELECTION switch (see page 22).
왘 Switch your audio source off before connecting the transmitter.
왘 Check the connection possibilities of your audio source (audio output,
usually marked “OUT”).
왘 Select the corresponding connection cable and, if necessary, a suitable
adapter.
왘 Depending on the connection possibility selected, go to the respective
chapter and follow the instructions on how to connect the transmitter
to an audio source.
You can also refer to the beginner’s video guides on how to connect
your digital wireless headphone system to a TV. The video guides are
available at www.sennheiser.com/how-to-videos.
Connection possibilities of
the audio source
Connection cable
Page
Optical (digital) Optical digital cable 14
3.5 mm or 6.3 mm/¼“
jack socket (analog)
Stereo audio cable;
in case of a 6.3 mm/¼“ jack
socket: with adapter 3.5 mm jack
socket to 6.3 mm/¼“ jack plug
(to be ordered separately)
15
RCA (analog)
Stereo audio cable with adapter
3.5 mm jack socket to
2 RCA plugs (to be ordered
separately)
16
Accessories and adapters are available from your Sennheiser part-
ner.
A
B
C
Loading ...
Loading ...
Loading ...