Loading ...
Loading ...
Loading ...
EN
W415-2960 / B / 06.07.22
27
Napoleon Connectivity
Current
Hour
Day of the
Week
Date
YYYY.MM.DD
Indoor
Temperature
Indoor
Humidity
Thermostat
Set Temp.
Heater
Status
Outdoor
Temperature
Outdoor
Humidity
Rain
Snow
Cloud
Night
Wind
Day / Sun
Current
Minute
AM / PM
Display
6.4 weather display layout
6.5 Napoleon Connectivity important information
1. Napoleon Connectivity requires 2.4GHz Wi-fi.
2. The decoration light button on the control panel is also an indication light used to indicate when the fireplace
Wi-fi communication is enabled. If the button is not illuminated, the Wi-fi connection has been disconnected
or disabled and needs to be reconnected.
3. The fireplace incorporates an additional safety feature which will disable the Wi-Fi communication to the
fireplace if the fireplace senses that the ambient room temperature is 30°C or above. This is to help prevent
any possible risks of over-heating the fireplace and/or other devices in the room. To re-enable the Wi-fi com-
munications, wait until the room temperature has cooled below 30°C, unplug the fireplace for 5 seconds, then
plug it back in. The Wi-fi connection will reconnect within a few seconds.
Loading ...
Loading ...
Loading ...