Loading ...
Loading ...
Loading ...
- 9 -
STEP 5: Attach Hydraulic Hose, Storage Tube, Log Cradle and Fender
1.
Put O ring Ø11x2.5
(#19) on the gear pump outlet connector (#23), attach the hydraulic hose
(#16) to the gear pump outlet connector (#23).
2. Put O ring Ø17x2.5 (#68) on the external filter connector (#50), attach the hydraulic hose (#7)
to the connector (#50).
3. Remove the hex bolt M6x90 (#75), big flat washer Ø6 (#76) and nylon lock nut M6 (#77) from
the tow bar. Attach the storage tube (#74) using the hex bolt M6x90 (#75), big flat washer Ø6
(#76) and nylon lock nut M6 (#77).
4. Attach the log cradle (#64) to the beam using hex bolt M12x35 (#82), flat washer Ø12 (#62)
and nylon lock nut M12 (#13).
5. Attach the fenders (#85 & #86) to the oil tank using hex bolt M8x25 (#83), rubber washer (#84),
flat washer Ø8 (#36), lock washer Ø8 (#32) and hex lock nut M8 (#31).
6. Remove the spring cotter pin and the retaining pin from the control valve. Rotate the control
lever to the vertical position and secure with the retaining pin and the spring cotter pin.
Note: Please put rubber washer between fenders and oil tank.
Loading ...
Loading ...
Loading ...