Loading ...
Loading ...
Loading ...
- 8 -
STEP 3: Attach the Beam Assembly
1.
Attach the beam assembly (#17) to the hydraulic tank and secure using the hinge pin (#18)
and R-Pin Ø3 (#21).
STEP 4: Attach Engine
1.
Install the engine place four polyurethane block (#71) and big flat washer Ø10 (#72) between
the mounting plate and engine.
2. Position the engine (#33) over the blocks and secure it to the mount plate put the hex bolt
M8x65 (#46) through the bottom of the plate (bolt should go through blocks, flat washer and
engine base). Place a flat washer Ø8 (#36), lock washer Ø8 (#32) and tighten the nylon lock
nut M8 (#31)
3. Attach the clear oil pipe (#53) to the bottom of the gear pump and secure with clamp (#51).
Loading ...
Loading ...
Loading ...