Jenn-Air JGS9900BDB15 30" gas slide-in range

User Manual - Page 9

For JGS9900BDB15.

PDF File Manual, 88 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Side Panels,
and Door
Handles =
Painted Enamel
Stainless Steel
(select models)
* When cool, wash with warm, soapy water, rinse and dry. Never wipe a warm or hot surface with a damp
cloth as this may damage the surface and may cause a steam burn.
For stubborn soil, use mildly abrasive cleaning agents such as baking soda paste or Bon Ami *. Do not use
abrasive cleaners such as steel wool pads or oven cleaners. These products will scratch or permanently
damage the surface.
Note: Use a dry towel or cloth to wipe up spills, especially acidic or sugary spills. Surface may
discolor or dull if soil is not immediately removed. This is especially important for white surfaces.
* DO NOT USE ANY CLEANING PRODUCT CONTAiNiNG CHLORINE BLEACH.
* DO NOT USE ABRASIVE OR ORANGE CLEANERS.
* ALWAYS WiPE WITH THE GRAIN WHEN CLEANING.
* Daily Cleaning/Light Soil -= Wipe with one of the following - soapy water, white vinegar/water solution,
Formula 409 Glass and Surface Cleane¢ or a similar glass cleaner - using a sponge or soft cloth. Rinse
and dry. To polish and help prevent fingerprints, follow with Stainless Steel Magic Spray* (Part No.
20000008)**.
* Moderate/Heavy Soil == Wipe with one of the following - Bon Ami, Smart Cleanser, or Soft Scrub_-
using a damp sponge or soft cloth. Rinse and dry. Stubborn soils may be removed with a damp multi-
purpose Scotch-Brite * pad; rub evenly with the grain. Rinse and dry. To restore luster and remove streaks,
follow with Stainless Steel Magic Spray*.
, Discoloration == Using a damp sponge or soft cloth, wipe with Cameo Stainless Steel Cleane¢. Rinse
immediatelyand dry. To remove streaks and restore luster, follow with Stainless Steel Magic Spray*.
Brand names for cleaning products are registered trademarks of the respective manufacturers.
** To order direct, call 1-800-JENNAIR (1-800-536-6247).
A|NTENANCE
Oven Door
2.
3.
Align slots in the door with the hinge arms on the range.
Slide the door down onto the hinge arms until the door is
completely seated on the hinges. Push down on the top
corners of the door to completely seat door on hinges.
Door should not appear crooked.
Important: The oven door on a new range may feel "spongy"
when it is closed. This is normal and will decrease with use.
NEVER attempt to open or close door or operate oven until
door is properly replaced.
* NEVER place fingers between hinge and front oven frame.
Hinge arms are spring mounted. If accidentally hit, the
hinge will slam shut against oven frame and could injure
your fingers.
To remove:
1. When cool, open the oven door
to the broil stop position
(opened about four inches).
2. Grasp door at each side. Do not
use the door handle to lift door.
3. Lift up evenly until door clears
hinge arms.
To replace:
1. Grasp door at each side.
Oven Window
To protect the oven door window:
].
2.
.
Do not use abrasive cleaning agents such as steel wool
scouring pads or powdered cleansers as they may scratch
the glass.
Do not hit the glass with pots, pans, furniture, toys, or
other objects.
Do not close the oven door until the oven racks are in
place.
Scratching, hitting, jarring or stressing the glass may weaken
its structure causing an increasedrisk of breakage at a later
date.
Cont.
8
Loading ...
Loading ...
Loading ...